MEM-CO Barbed Fitting Elbow: 1/16 in Pipe x 1/8 in ID Size, MNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/16 in MNPT pipe connection and a 1/8 in ID beaded barb, designed for secure tubing attachment. This MNPT x Barbed, Brass, Beaded Barb…
SKU 3G-OTH-476476
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/16 in MNPT pipe connection and a 1/8 in ID beaded barb, designed for secure tubing attachment. This MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/16LB3) provides a reliable, compact elbow joint for fluid or air systems. 3G Electric interprets your demand, sources this genuine MEM-CO fitting, and supports your application with specialist expertise across 14 industrial departments — including combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow 1/16LB3 used for?
The MEM-CO Barbed Fitting Elbow 1/16LB3 is used to create a secure, leak-resistant 90-degree joint in low-pressure fluid or air systems. Its 1/16 in MNPT thread connects to ports, while the 1/8 in ID beaded barb grips flexible tubing. Common in pneumatic controls, lubrication lines, and instrumentation.
What are the specifications of the MEM-CO 1/16LB3 elbow?
The MEM-CO 1/16LB3 is a standard brass barbed fitting elbow with a 1/16 in male NPT pipe thread and a 1/8 in ID beaded barb. It is made of brass, uses an MNPT x Barbed connection type, and is designed for reliable tubing retention in compact spaces. The manufacturer part number is 1/16LB3.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies genuine MEM-CO barbed fittings like the 1/16LB3 elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we interpret your demand and source the exact MEM-CO part you need for your application.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 1/16LB3 elbow, apply thread sealant to the 1/16 in MNPT end and tighten into the port. For the barbed side, push flexible tubing of 1/8 in ID fully onto the beaded barb. Use a hose clamp if needed for higher pressure. Always verify tubing compatibility with your fluid or air system.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
