MEM-CO Barbed Fitting Elbow: 1/8 in Pipe x 11/64 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow (MPN 1/8FLB1) is a standard brass barbed tube fitting with a 1/8 in pipe connection and 11/64 in ID size. It features an FNPT x Barbed configuration with a beaded barb, constructed…
SKU 3G-OTH-476650
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow (MPN 1/8FLB1) is a standard brass barbed tube fitting with a 1/8 in pipe connection and 11/64 in ID size. It features an FNPT x Barbed configuration with a beaded barb, constructed from brass for durability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 11/64 in ID tubing to a 1/8 in FNPT port in pneumatic, fluid, or low-pressure air systems. Its brass construction resists corrosion, making it suitable for industrial instrumentation, lubrication lines, and control panels where a compact, leak-resistant joint is required.
What are the specifications of the MEM-CO 1/8FLB1 barbed fitting?
The MEM-CO 1/8FLB1 is a brass barbed fitting elbow with a 1/8 in FNPT female thread on one end and a beaded barb for 11/64 in ID tubing on the other. It is rated for standard industrial pneumatic and fluid applications. The beaded barb design provides secure hose retention without additional clamps.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings like the 1/8FLB1 elbow to customers worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your facility. Contact us for a quote on this brass fitting or other MEM-CO components for your project.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 1/8FLB1, apply thread sealant to the 1/8 in FNPT port and tighten with a wrench. Push the 11/64 in ID tubing fully onto the beaded barb until seated. For a secure seal, ensure the tubing is cut square and free of burrs. No additional clamps are needed for low-pressure applications.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
