MEM-CO Mini Barb Fitting: 1/2 in Pipe x 3/16 in ID Size, MNPT x Tube, Brass
The MEM-CO Mini Barb Fitting is a standard brass barbed tube fitting with a 1/2 in pipe (MNPT) connection and 3/16 in ID tube size. This brass fitting has an overall length of 1 1/4 in (MPN 1/2B5-NP). 3G Electric…
SKU 3G-OTH-476705
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Mini Barb Fitting is a standard brass barbed tube fitting with a 1/2 in pipe (MNPT) connection and 3/16 in ID tube size. This brass fitting has an overall length of 1 1/4 in (MPN 1/2B5-NP). 3G Electric sources this genuine MEM-CO component across 14 industrial departments, with specialist expertise in combustion, pumps, and controls to ensure the right part for your application.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Mini Barb Fitting used for?
The MEM-CO Mini Barb Fitting connects 3/16 in ID tubing to a 1/2 in male NPT pipe port. It is commonly used in pneumatic, fluid-handling, and low-pressure fuel or water systems across industrial departments such as machining, instrumentation, and combustion.
What are the specifications of the MEM-CO 1/2B5-NP barb fitting?
This MEM-CO brass barb fitting has a 1/2 in MNPT pipe connection and a 3/16 in ID tube size. Overall length is 1 1/4 in. The type is MNPT x Tube, Brass, with manufacturer part number 1/2B5-NP. It is a standard barbed tube fitting for secure tubing retention.
Where to buy MEM-CO Mini Barb Fitting worldwide?
3G Electric supplies the genuine MEM-CO Mini Barb Fitting (1/2B5-NP) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this brass barbed fitting.
How to install a MEM-CO brass barb fitting?
To install, wrap the male NPT threads with PTFE tape and hand-tighten into the port. Push the tubing fully onto the barb until seated. For a secure seal, use a hose clamp on the barb if the application exceeds 1.5 bar. Always verify tube ID matches 3/16 in.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
