MEM-CO Barbed Fitting Elbow: 1/8 in Pipe x 5/32 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 1/8 in pipe (FBSPT) connection and a 5/32 in ID size, featuring a beaded barb design. This elbow fitting is part of the FBSPT x…
SKU 3G-OTH-465424
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 1/8 in pipe (FBSPT) connection and a 5/32 in ID size, featuring a beaded barb design. This elbow fitting is part of the FBSPT x Barbed, Brass, Beaded Barb type, identified by manufacturer part number 1/8BSPT-LB3-1/2-NP.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MEM-CO Barbed Fitting Elbow used for?
This MEM-CO nickel-plated brass elbow connects 5/32 in ID tubing to a 1/8 in FBSPT female threaded port. It is used in pneumatic, instrumentation, and fluid-handling systems where a leak-resistant, compact 90° turn is needed.
What are the specifications of the MEM-CO 1/8BSPT-LB3-1/2-NP?
The MEM-CO 1/8BSPT-LB3-1/2-NP is a nickel-plated brass barbed elbow. It has a 1/8 in FBSPT male thread on one end and a beaded barb for 5/32 in ID tubing on the other. The beaded barb design improves grip and seal retention.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on the 1/8BSPT-LB3-1/2-NP or other MEM-CO nickel-plated brass fittings.
How to install a MEM-CO barbed elbow fitting?
Cut tubing square, push it firmly onto the beaded barb until seated, and secure with a hose clamp if needed. For the threaded end, apply PTFE tape to the 1/8 in FBSPT male thread and tighten to the female port. Avoid over-torquing brass.
MEM-CO Produk
3G Electric memasok MEM-CO nickel-plated brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
