MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 11/64 in ID Size, MNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 1/2 in pipe and 11/64 in ID size, featuring an MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/2LB4-NP). This component is…
SKU 3G-OTH-465266
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 1/2 in pipe and 11/64 in ID size, featuring an MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/2LB4-NP). This component is available through 3G Electric, which interprets customer demand and supplies genuine industrial equipment across 14 departments, with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects tubing to threaded ports in pneumatic, hydraulic, and fluid-handling systems. Its 1/2 in MNPT thread and 11/64 in ID barbed end provide a secure, leak-resistant joint for low-pressure air, water, or oil lines in industrial machinery.
What are the specifications of the MEM-CO 1/2LB4-NP barbed fitting?
The MEM-CO 1/2LB4-NP is a nickel-plated brass barbed fitting elbow with a 1/2 in MNPT pipe thread and 11/64 in ID barbed size. It features a beaded barb design for hose retention. The part is made by MEM-CO and is suitable for general industrial fluid transfer applications.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the MEM-CO 1/2LB4-NP or other nickel-plated brass fittings for your pneumatic or fluid systems.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO barbed fitting elbow, apply thread sealant to the 1/2 in MNPT end and tighten into the female port. Push the hose onto the barbed end until seated against the beaded barb. Secure with a hose clamp if required. Avoid over-tightening to prevent damage to the brass body.
MEM-CO Produk
3G Electric memasok MEM-CO nickel-plated brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
