MEM-CO Barbed Fitting Elbow: 3/8 in Pipe x 11/64 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow (MPN 3/8FLB4-NP) is a nickel-plated brass barbed tube fitting with a 3/8 in FNPT pipe connection and a 11/64 in ID beaded barb. This elbow configuration is designed for secure tube…
SKU 3G-OTH-465545
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow (MPN 3/8FLB4-NP) is a nickel-plated brass barbed tube fitting with a 3/8 in FNPT pipe connection and a 11/64 in ID beaded barb. This elbow configuration is designed for secure tube attachment in fluid or pneumatic systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow 3/8FLB4-NP used for?
The MEM-CO Barbed Fitting Elbow 3/8FLB4-NP is used to connect a 3/8 in FNPT threaded pipe to a 11/64 in ID flexible tube in fluid or pneumatic systems. Its nickel-plated brass construction resists corrosion, making it suitable for industrial air, water, or low-pressure hydraulic lines.
What are the specifications of the MEM-CO 3/8FLB4-NP elbow?
The MEM-CO 3/8FLB4-NP is a nickel-plated brass barbed fitting elbow. It has a 3/8 in FNPT female pipe thread on one end and a 11/64 in ID beaded barb on the other. The beaded barb design provides secure tube retention without clamps in low-pressure applications.
Where to buy the MEM-CO 3/8FLB4-NP barbed fitting worldwide?
3G Electric supplies the MEM-CO 3/8FLB4-NP barbed fitting elbow to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this nickel-plated brass fitting.
How to install the MEM-CO barbed fitting elbow?
To install the MEM-CO 3/8FLB4-NP elbow, thread the 3/8 in FNPT port onto a male pipe thread using PTFE tape or sealant. Push the 11/64 in ID tube fully onto the beaded barb until seated. For secure retention in higher-pressure systems, use a hose clamp behind the barb bead.
MEM-CO Produk
3G Electric memasok MEM-CO nickel-plated brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









