MILLER ELECTRIC Liner: 1/16 in, PTFE
The MILLER ELECTRIC Liner, model 136683, is a PTFE liner designed for use with Bernard, Miller, and Hobart MIG guns in the Spoolgun series. This 1/16 in liner is manufactured by MILLER ELECTRIC under part number 136683.
SKU 3G-OTH-356618
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MILLER ELECTRIC Liner, model 136683, is a PTFE liner designed for use with Bernard, Miller, and Hobart MIG guns in the Spoolgun series. This 1/16 in liner is manufactured by MILLER ELECTRIC under part number 136683.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MILLER ELECTRIC Liner 136683 used for?
The MILLER ELECTRIC Liner 136683 is a PTFE liner for Bernard, Miller, and Hobart MIG guns in the Spoolgun series. It guides welding wire through the gun cable, reducing friction and preventing bird-nesting, especially with aluminum or soft wires. Common in fabrication, automotive, and light-industrial welding applications.
What are the specifications of the MILLER ELECTRIC Liner 136683?
The MILLER ELECTRIC Liner 136683 is a 1/16 in PTFE liner for the Spoolgun series. It is manufactured by MILLER ELECTRIC under part number 136683. The PTFE material provides low friction and high heat resistance, making it suitable for feeding aluminum and other soft welding wires through Bernard, Miller, and Hobart MIG guns.
Where to buy the MILLER ELECTRIC Liner 136683 worldwide?
You can source the MILLER ELECTRIC Liner 136683 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time. 3G Electric supplies genuine MILLER ELECTRIC parts for Bernard, Miller, and Hobart MIG guns.
How to install the MILLER ELECTRIC Liner 136683?
To install the MILLER ELECTRIC Liner 136683, first disconnect the MIG gun from the welder. Remove the old liner from the Spoolgun series gun, then insert the new 1/16 in PTFE liner through the gun cable until it seats at both ends. Trim any excess liner per the gun manual, then reassemble and test wire feed. Always follow the manufacturer's instructions.
Digunakan dalam
Aplikasi umum untuk MILLER ELECTRICMILLER ELECTRIC Produk
3G Electric memasok MILLER ELECTRIC liners for bernard, miller & hobart mig guns. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
