MILLER ELECTRIC Liner: 1/16 in, PTFE
The MILLER ELECTRIC Liner, model 229431, is a PTFE liner designed for use with Bernard, Miller, and Hobart MIG guns. This Spoolgun series liner has a 1/16 in diameter and is manufactured by MILLER ELECTRIC under part…
SKU 3G-OTH-356628
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MILLER ELECTRIC Liner, model 229431, is a PTFE liner designed for use with Bernard, Miller, and Hobart MIG guns. This Spoolgun series liner has a 1/16 in diameter and is manufactured by MILLER ELECTRIC under part number 229431.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MILLER ELECTRIC Liner 229431 used for?
The MILLER ELECTRIC Liner 229431 is a PTFE liner used in Bernard, Miller, and Hobart MIG guns. It guides welding wire through the gun cable, reducing friction and preventing bird-nesting, especially with aluminum or soft wires. This Spoolgun series liner is ideal for industrial fabrication and repair applications.
What are the specifications of the MILLER ELECTRIC Liner 229431?
The MILLER ELECTRIC Liner 229431 is a PTFE liner with a 1/16 in diameter, part of the Spoolgun series. It is manufactured by MILLER ELECTRIC under MPN 229431. This liner is designed for use with Bernard, Miller, and Hobart MIG guns, providing smooth wire feeding for aluminum and other soft wires.
Where to buy the MILLER ELECTRIC Liner 229431 worldwide?
You can source the MILLER ELECTRIC Liner 229431 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine MILLER ELECTRIC components for MIG gun maintenance.
How to install the MILLER ELECTRIC Liner 229431?
To install the MILLER ELECTRIC Liner 229431, first disconnect the MIG gun from the welder. Remove the old liner from the gun cable, then insert the new PTFE liner, ensuring it seats fully at both the gun end and the feed end. Trim any excess liner per the gun manufacturer's instructions, then reassemble and test wire feed.
Digunakan dalam
Aplikasi umum untuk MILLER ELECTRICMILLER ELECTRIC Produk
3G Electric memasok MILLER ELECTRIC liners for bernard, miller & hobart mig guns. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
