MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire, 3 Pins, Yellow, PUR, 2 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 3 pins, 24 AWG wire size, a…
SKU 3G-OTH-50685
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 3 pins, 24 AWG wire size, a yellow cable jacket, and an IP67 rating. The cable length is 2 meters.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08001-0300200 cordset used for?
This MURRELEKTRONIK cordset connects sensors or actuators in industrial automation, robotics, and twisting applications. Its M8 male straight connector and bare-wire end simplify wiring in tight spaces, while the PUR jacket resists abrasion and flexing. The IP67 rating protects against dust and water ingress.
What are the specifications of the MURRELEKTRONIK 7000-08001-0300200 cordset?
This cordset has 3 pins, 24 AWG wire size, a 2 m cable length, and a yellow PUR jacket. It features an M8 male straight connector on one end and bare wire on the other, with an IP67 rating. The manufacturer part number is 7000-08001-0300200.
Where to buy the MURRELEKTRONIK 7000-08001-0300200 cordset worldwide?
3G Electric supplies the MURRELEKTRONIK 7000-08001-0300200 cordset worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this cordset to your facility. Contact us for pricing and lead time.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
To install, connect the M8 male connector to the sensor or actuator port, then terminate the bare-wire end into a terminal block or controller using proper strain relief. Ensure the IP67 seal is intact and the cable is routed to avoid sharp bends. Follow standard wiring practices for 24 AWG conductors.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pur jacket for twisting applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















