MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire, 3 Pins, Yellow, PUR, 10 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 3 pins, 24 AWG wire size, a…
SKU 3G-OTH-51256
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 3 pins, 24 AWG wire size, a yellow cable jacket, and an IP65 rating.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08001-0301000 cordset used for?
This single-ended cordset connects sensors or actuators in industrial automation, robotics, and twisting applications. Its M8 male straight connector and bare wire end simplify field wiring, while the PUR jacket resists oils and abrasion. The IP65 rating makes it suitable for harsh factory-floor environments.
What are the specifications of the MURRELEKTRONIK 7000-08001-0301000 cordset?
This cordset has 3 pins, 24 AWG wire size, a 10 m cable length, and a yellow PUR jacket. End 1 is an M8 male straight connector; End 2 is bare wire. It carries an IP65 rating and is designed for twisting applications. The manufacturer part number is 7000-08001-0301000.
Where to buy the MURRELEKTRONIK 7000-08001-0301000 cordset worldwide?
3G Electric supplies this MURRELEKTRONIK cordset worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver this cordset to any country.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
Connect the M8 male straight plug to the sensor or actuator port, tightening the coupling nut by hand. Strip the bare wire ends to the recommended length and terminate them in a terminal block or controller. Avoid sharp bends near the connector to maintain the IP65 seal and cable integrity.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pur jacket for twisting applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















