MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire, 4 Pins, Black, PUR, 7.5 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 4 pins, 24 AWG wire size, a 7.5…
SKU 3G-OTH-50525
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 4 pins, 24 AWG wire size, a 7.5 m cable length, and an IP65 rating.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08011-6310750 cordset used for?
This MURRELEKTRONIK cordset is used for connecting sensors and actuators in industrial automation, particularly in twisting applications. Its PUR jacket provides resistance to abrasion and chemicals, while the M8 male straight connector and bare wire end enable reliable signal transmission in tight spaces.
What are the specifications of the MURRELEKTRONIK 7000-08011-6310750 cordset?
This cordset has an M8 male straight connector on one end and bare wire on the other, with 4 pins, 24 AWG wire size, and a 7.5 m cable length. It features a black PUR jacket, IP65 rating, and is designed for twisting applications. The manufacturer part number is 7000-08011-6310750.
Where to buy the MURRELEKTRONIK 7000-08011-6310750 cordset worldwide?
3G Electric supplies the MURRELEKTRONIK 7000-08011-6310750 cordset worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
To install, connect the M8 male straight connector to the sensor or actuator port, ensuring a secure fit for IP65 protection. Strip the bare wire ends to the recommended length and terminate them in a terminal block or controller. Avoid sharp bends to protect the PUR jacket.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pur jacket for twisting applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















