MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire, 4 Pins, Black, PUR, 10 m Cable Lg
The MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire is a single-ended cordset with a PUR jacket for twisting applications. It features an M8 male straight connector on one end and bare wire on the other, with 4…
SKU 3G-OTH-51330
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire is a single-ended cordset with a PUR jacket for twisting applications. It features an M8 male straight connector on one end and bare wire on the other, with 4 pins, 24 AWG wire size, and a 10 m cable length. The cordset has an IP66K rating and a black PUR cable jacket.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08011-6311000 cordset used for?
This single-ended cordset is used for twisting applications in industrial automation, connecting sensors or actuators to control systems. Its M8 male straight connector and bare wire end suit tight spaces, while the PUR jacket resists oils and abrasion in harsh factory environments.
What are the specifications of the MURRELEKTRONIK 7000-08011-6311000 cordset?
This cordset has 4 pins, 24 AWG wire size, 10 m cable length, and an IP66K rating. It features an M8 male straight connector on one end and bare wire on the other, with a black PUR jacket. The manufacturer part number is 7000-08011-6311000.
Where to buy the MURRELEKTRONIK 7000-08011-6311000 cordset worldwide?
3G Electric supplies this MURRELEKTRONIK cordset worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver globally.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
Connect the M8 male straight end to the device port, tightening by hand. Strip the bare wire end to the recommended length and terminate into a terminal block or connector. Avoid sharp bends to protect the PUR jacket. Verify IP66K seal after installation.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pur jacket for twisting applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















