NIBCO Manual Two-Way Ball Valve: 1 1/4 in, Bronze, Straight, Sweat x Sweat, Full Port
The NIBCO Manual Two-Way Ball Valve (MPN S58570 1-1/4) is a bronze, full-port, two-piece valve with a 1 1/4 in sweat x sweat connection and a lever handle. This straight-pattern valve is designed for manual on/off…
SKU 3G-OTH-430851
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NIBCO Manual Two-Way Ball Valve (MPN S58570 1-1/4) is a bronze, full-port, two-piece valve with a 1 1/4 in sweat x sweat connection and a lever handle. This straight-pattern valve is designed for manual on/off flow control in industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NIBCO S58570 1-1/4 ball valve used for?
The NIBCO S58570 1-1/4 is a manual two-way ball valve used for on/off flow control in industrial piping systems. Its bronze construction and sweat connections make it suitable for water, oil, and gas applications in commercial and industrial settings where a full-port, straight-pattern valve is required.
What are the specifications of the NIBCO S58570 1-1/4 ball valve?
The NIBCO S58570 1-1/4 is a bronze, full-port, two-piece ball valve with a 1 1/4 in sweat x sweat connection and a lever handle. It has a straight pattern and is designed for manual operation. The manufacturer part number is S58570 1-1/4.
Where to buy the NIBCO S58570 1-1/4 ball valve worldwide?
3G Electric supplies the NIBCO S58570 1-1/4 ball valve worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this NIBCO bronze ball valve.
How to install a NIBCO sweat x sweat ball valve?
To install a NIBCO sweat x sweat ball valve, clean and flux the pipe ends and valve sockets, then heat the joint evenly until solder melts into the gap. Allow the joint to cool without movement. Always follow local plumbing codes and use proper safety gear when soldering.
Digunakan dalam
Aplikasi umum untuk NIBCONIBCO Produk
3G Electric memasok NIBCO bronze ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
