NIBCO Manual Two-Way Ball Valve: 1/2 in, Bronze, Straight, Sweat x Sweat, Full Port
The NIBCO Manual Two-Way Ball Valve (MPN S5857066-1/2) is a bronze, full-port, two-piece valve with a straight body and sweat x sweat connections. It features a lever handle and is designed for manual on/off control…
SKU 3G-OTH-430947
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NIBCO Manual Two-Way Ball Valve (MPN S5857066-1/2) is a bronze, full-port, two-piece valve with a straight body and sweat x sweat connections. It features a lever handle and is designed for manual on/off control in industrial fluid-handling systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NIBCO Manual Two-Way Ball Valve used for?
The NIBCO Manual Two-Way Ball Valve is used for on/off control of fluid flow in industrial piping systems. Its bronze construction and sweat connections make it suitable for water, oil, and gas applications in HVAC, plumbing, and process industries where reliable shut-off is required.
What are the specifications of the NIBCO S5857066-1/2 ball valve?
This NIBCO ball valve has a 1/2 in sweat x sweat connection, full-port design, two-piece bronze body, and a lever handle. It is a manual two-way valve with straight body configuration, designed for industrial fluid handling. The manufacturer part number is S5857066-1/2.
Where to buy NIBCO ball valves worldwide?
3G Electric supplies NIBCO ball valves worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source the NIBCO S5857066-1/2 or other models for your project.
How to install a NIBCO sweat ball valve?
To install a NIBCO sweat ball valve, clean and flux the pipe ends and valve sockets, then heat evenly and apply solder until it flows into the joint. Allow to cool naturally. Ensure the valve is in the open position during soldering to avoid damaging the seat. Follow local plumbing codes.
Digunakan dalam
Aplikasi umum untuk NIBCONIBCO Produk
3G Electric memasok NIBCO bronze ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
