NTN 4 Bolt Flange Bearing: Radial Ball, 1 3/16 in Bore, Cast Iron, Set Screws
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a cylindrical bore and a 1 3/16 in bore size. It features a cast iron housing, set screw locking, and a square configuration with a 4…
SKU 3G-OTH-120920
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a cylindrical bore and a 1 3/16 in bore size. It features a cast iron housing, set screw locking, and a square configuration with a 4 21/32 in length. The bearing is lubricated with NLGI #3 Equivalent grease and uses a 1/2 in mounting bolt size, measured in inches.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 4 Bolt Flange Bearing used for?
The NTN 4 Bolt Flange Bearing is used in industrial applications requiring radial load support and shaft alignment, such as conveyors, fans, and material handling equipment. Its cast iron housing and set screw locking provide secure mounting in square flange configurations.
What are the specifications of the NTN UCFUX-1.3/16M flange bearing?
The NTN UCFUX-1.3/16M is a 4 bolt flange bearing with a 1 3/16 in cylindrical bore, cast iron housing, set screw locking, and a 4 21/32 in square length. It uses NLGI #3 Equivalent grease and requires a 1/2 in mounting bolt. System of measurement is inch.
Where to buy NTN flange bearings in worldwide?
3G Electric supplies NTN flange bearings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on the NTN UCFUX-1.3/16M or other models.
How to install the NTN 4 Bolt Flange Bearing?
To install the NTN 4 Bolt Flange Bearing, align the square flange to the mounting surface, insert 1/2 in bolts through the four holes, and tighten evenly. Secure the shaft using the set screws. Lubricate with NLGI #3 grease per NTN recommendations for optimal performance.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
