NTN 4 Bolt Flange Bearing: Radial Ball, 2 11/16 in Bore, Cast Iron, Set Screws
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 11/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking, uses NLGI #3 equivalent lubricant…
SKU 3G-OTH-120221
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 11/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking, uses NLGI #3 equivalent lubricant, and accepts a 3/4 in mounting bolt. This inch-system unit is identified by manufacturer part number UCFUX-2.11/16M.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 4 Bolt Flange Bearing used for?
The NTN 4 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts in conveyors, fans, and material handling equipment. Its cast iron housing and set-screw locking provide reliable radial load support in moderate-duty applications.
What are the specifications of the NTN UCFUX-2.11/16M flange bearing?
This NTN flange bearing has a 2 11/16 in cylindrical bore, a 7 7/8 in length, and a cast iron square housing with set-screw shaft locking. It uses NLGI #3 equivalent lubricant, accepts a 3/4 in mounting bolt, and is an inch-system unit (MPN UCFUX-2.11/16M).
Where to buy the NTN 4 Bolt Flange Bearing worldwide?
3G Electric supplies the NTN 4 Bolt Flange Bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this inch-system unit.
How to install the NTN flange bearing with set screws?
To install, align the bearing housing on a flat surface and tighten the 3/4 in mounting bolts. Slide the shaft through the 2 11/16 in bore, then tighten the set screws evenly against the shaft using a hex key. Ensure the shaft is clean and lubricated per NTN guidelines.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
