PARKER Barbed Fitting Elbow: 1/4 in ID x 11/64 in ID Size, Barbed x Barbed, Brass
The PARKER Barbed Fitting Elbow (MPN 225-4-5/32) is a standard brass barbed tube fitting with a rigid barbed x barbed configuration, sized for 1/4 in ID x 11/64 in ID connections. 3G Electric interprets your demand…
SKU 3G-OTH-476755
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Barbed Fitting Elbow (MPN 225-4-5/32) is a standard brass barbed tube fitting with a rigid barbed x barbed configuration, sized for 1/4 in ID x 11/64 in ID connections. 3G Electric interprets your demand for this genuine PARKER component, sourcing it across our 14 industrial departments and backing it with specialist expertise in fluid controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Barbed Fitting Elbow 225-4-5/32 used for?
This PARKER brass barbed elbow connects two tubes of 1/4 in ID and 11/64 in ID in fluid systems. It is used in pneumatic, hydraulic, and instrumentation lines where a rigid, leak-resistant joint is needed. 3G Electric supplies this genuine PARKER component across 14 industrial departments.
What are the specifications of the PARKER 225-4-5/32 barbed fitting?
The PARKER 225-4-5/32 is a rigid brass barbed x barbed elbow fitting. It accommodates tube IDs of 1/4 in and 11/64 in. The manufacturer part number is 225-4-5/32. 3G Electric sources this genuine PARKER fitting, backed by specialist expertise in fluid controls.
Where to buy PARKER 225-4-5/32 barbed fitting worldwide?
3G Electric supplies the genuine PARKER 225-4-5/32 barbed fitting to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this brass elbow for your fluid system needs.
How to install a PARKER brass barbed elbow fitting?
Cut the tube ends square, deburr, and push each tube fully onto the barb until seated. For brass fittings, avoid over-tightening. Use a compatible sealant if required. 3G Electric provides technical support for selecting and installing genuine PARKER fittings across industrial applications.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
