PARKER Barbed Fitting Adapter: 11/64 in ID x 11/64 in ID Size, Barbed x FTG, Brass
The PARKER Barbed Fitting Adapter (MPN 238-4-4) is a standard brass barbed tube fitting with a rigid barbed x FTG configuration, sized at 11/64 in ID x 11/64 in ID. This adapter is part of our broad industrial supply…
SKU 3G-OTH-476713
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Barbed Fitting Adapter (MPN 238-4-4) is a standard brass barbed tube fitting with a rigid barbed x FTG configuration, sized at 11/64 in ID x 11/64 in ID. This adapter is part of our broad industrial supply across 14 departments, supported by specialist depth in fluid controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Barbed Fitting Adapter 238-4-4 used for?
The PARKER Barbed Fitting Adapter 238-4-4 connects two tubes with 11/64 in ID using a barbed x FTG configuration. It is commonly used in pneumatic and fluid-handling systems where a rigid brass adapter provides a secure, leak-resistant joint. 3G Electric supplies this across 14 industrial departments.
What are the specifications of the PARKER 238-4-4 barbed fitting?
The PARKER 238-4-4 is a standard brass barbed tube fitting with a rigid barbed x FTG design. It has an 11/64 in ID x 11/64 in ID size. The manufacturer part number is 238-4-4. This adapter is suitable for low-pressure fluid and air applications.
Where to buy the PARKER 238-4-4 barbed fitting worldwide?
3G Electric supplies the PARKER 238-4-4 barbed fitting adapter to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine PARKER components across 14 departments.
How to install a PARKER barbed fitting adapter?
To install the PARKER 238-4-4, cut the tube squarely, push it firmly onto the barb until seated, and secure with a hose clamp if needed. Ensure the tube ID matches the 11/64 in barb size. For rigid brass fittings, avoid over-tightening. 3G Electric provides technical support for selection.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
