PARKER Compression Fitting Elbow: 3/8 in OD x 1/4 in Pipe Size, Compression x FNPTF
The PARKER Compression Fitting Elbow (MPN N6FE4) is a general purpose nylon compression fitting with a 3/8 in OD x 1/4 in Pipe Size, featuring a Compression x FNPTF connection type. This component is designed for…
SKU 3G-OTH-475944
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (MPN N6FE4) is a general purpose nylon compression fitting with a 3/8 in OD x 1/4 in Pipe Size, featuring a Compression x FNPTF connection type. This component is designed for reliable fluid system connections in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER N6FE4 compression fitting elbow used for?
The PARKER N6FE4 is a general purpose nylon compression fitting elbow used to connect 3/8 in OD tubing to a 1/4 in FNPTF threaded port in industrial fluid systems. It provides a reliable, leak-resistant joint in pneumatic, instrumentation, and low-pressure hydraulic applications.
What are the specifications of the PARKER N6FE4 compression fitting?
The PARKER N6FE4 is a nylon compression fitting elbow with a 3/8 in OD tube connection and a 1/4 in FNPTF female thread. It uses a Compression x FNPTF connection type and is designed for general purpose industrial fluid handling. The manufacturer part number is N6FE4.
Where to buy PARKER N6FE4 compression fittings worldwide?
3G Electric supplies the PARKER N6FE4 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this nylon compression fitting for your industrial fluid system needs.
How to install a PARKER nylon compression fitting elbow?
To install the PARKER N6FE4, cut tubing squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut before using a wrench for an additional 1/4 to 1/2 turn. Avoid overtightening to prevent damage to the nylon body.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









