PARKER Compression Tee Fitting: 1/2 in OD x 1/2 in OD x 1/2 in Pipe Size
The PARKER Compression Tee Fitting (MPN N8MT8) is a general purpose nylon compression fitting with 1/2 in OD x 1/2 in OD x 1/2 in pipe size connections. This tee configuration enables branching in fluid systems…
SKU 3G-OTH-475857
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN N8MT8) is a general purpose nylon compression fitting with 1/2 in OD x 1/2 in OD x 1/2 in pipe size connections. This tee configuration enables branching in fluid systems, constructed from nylon for corrosion resistance.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER N8MT8 compression tee fitting used for?
The PARKER N8MT8 compression tee fitting is used to branch fluid lines in pneumatic or low-pressure hydraulic systems. Its nylon construction resists corrosion, making it suitable for water, air, and chemical handling applications across industrial plant maintenance and process control.
What are the specifications of the PARKER N8MT8 compression tee fitting?
The PARKER N8MT8 is a general purpose nylon compression tee fitting with three connections: two for 1/2 in OD tubing and one for 1/2 in pipe size. The nylon material provides corrosion resistance and lightweight durability for low-pressure fluid systems.
Where to buy the PARKER N8MT8 compression tee fitting worldwide?
3G Electric supplies the PARKER N8MT8 compression tee fitting worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this nylon compression fitting.
How to install a PARKER nylon compression tee fitting?
To install a PARKER nylon compression tee fitting, cut tubing squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut before using a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage to the nylon body.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
