PARKER Compression Fitting Union: 5/8 in OD x 3/8 in OD Size, Compression x Compression
The PARKER Compression Fitting Union (MPN N10UC6) is a general purpose nylon compression fitting with a 5/8 in OD x 3/8 in OD size and a Compression x Compression type. This PARKER component provides a…
SKU 3G-OTH-476070
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Union (MPN N10UC6) is a general purpose nylon compression fitting with a 5/8 in OD x 3/8 in OD size and a Compression x Compression type. This PARKER component provides a straightforward union connection for tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER N10UC6 compression fitting union used for?
The PARKER N10UC6 nylon compression fitting union connects two tubing lines of 5/8 in OD and 3/8 in OD in pneumatic or low-pressure fluid systems. It provides a leak-resistant, straightforward union joint for general industrial applications where corrosion resistance and lightweight assembly are needed.
What are the specifications of the PARKER N10UC6 compression fitting?
The PARKER N10UC6 is a general purpose nylon compression fitting union. It has a 5/8 in OD x 3/8 in OD size with Compression x Compression ends. The manufacturer part number is N10UC6. This fitting is designed for reliable tubing connections in low-pressure pneumatic and fluid systems.
Where to buy the PARKER N10UC6 compression fitting union worldwide?
3G Electric supplies the PARKER N10UC6 compression fitting union to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team for a quote and lead time on this nylon compression fitting for your industrial tubing needs.
How to install a PARKER nylon compression fitting union?
To install the PARKER N10UC6, cut tubing squarely, deburr the ends, and slide the nut and ferrule onto each tube. Insert the tube fully into the fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage to the nylon body.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









