POWER DRIVE Gearbelt Pulley: For L Timing Belt Section, For 1/2 in Belt Wd, 20 Teeth
The POWER DRIVE Gearbelt Pulley is a bushed L section timing belt pulley designed for use with L timing belt sections. It features 20 teeth, a 0.375-inch pitch, and accommodates a 1/2-inch belt width. This pulley…
SKU 3G-OTH-114019
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The POWER DRIVE Gearbelt Pulley is a bushed L section timing belt pulley designed for use with L timing belt sections. It features 20 teeth, a 0.375-inch pitch, and accommodates a 1/2-inch belt width. This pulley utilizes a split taper bushing type for secure mounting.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the POWER DRIVE Gearbelt Pulley used for?
The POWER DRIVE Gearbelt Pulley is used in power transmission systems to transfer rotary motion between shafts using an L-section timing belt. It is commonly applied in industrial machinery, conveyor systems, and automation equipment where precise timing and positive drive are required.
What are the specifications of the POWER DRIVE 20LG050 pulley?
The POWER DRIVE 20LG050 is a bushed L-section timing belt pulley with 20 teeth and a 0.375-inch pitch. It accommodates a 1/2-inch belt width and uses a split taper bushing type for secure mounting. The manufacturer part number is 20LG050.
Where to buy the POWER DRIVE 20LG050 pulley worldwide?
You can source the POWER DRIVE 20LG050 pulley through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring reliable supply for your power transmission needs.
How to install a split taper bushing on a POWER DRIVE pulley?
To install a split taper bushing on a POWER DRIVE pulley, first clean the shaft and bushing bore. Insert the bushing into the pulley hub, align the keyway, and tighten the mounting screws evenly to the recommended torque. Always follow the manufacturer's generic installation guidelines for safe operation.
Digunakan dalam
Aplikasi umum untuk POWER DRIVEPOWER DRIVE Produk
3G Electric memasok POWER DRIVE bushed l section timing belt pulleys. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
