POWER DRIVE Gearbelt Pulley: For L Timing Belt Section, For 1/2 in Belt Wd, 28 Teeth
The POWER DRIVE Gearbelt Pulley is a bushed L section timing belt pulley designed for use with L timing belt sections. It features 28 teeth, a 0.375-inch pitch, and is intended for a 1/2-inch belt width, utilizing a…
SKU 3G-OTH-114042
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The POWER DRIVE Gearbelt Pulley is a bushed L section timing belt pulley designed for use with L timing belt sections. It features 28 teeth, a 0.375-inch pitch, and is intended for a 1/2-inch belt width, utilizing a split taper bushing type (MPN 28LH050).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the POWER DRIVE Gearbelt Pulley used for?
The POWER DRIVE Gearbelt Pulley is used in power transmission systems to transfer rotary motion between shafts using an L-section timing belt. It is commonly applied in industrial machinery, conveyor systems, and automation equipment where precise timing and positive drive are required.
What are the specifications of the POWER DRIVE 28LH050 pulley?
The POWER DRIVE 28LH050 is a bushed L-section timing belt pulley with 28 teeth and a 0.375-inch pitch. It is designed for a 1/2-inch belt width and uses a split taper bushing type. The manufacturer part number is 28LH050, and it is compatible with L timing belt sections.
Where to buy the POWER DRIVE 28LH050 pulley worldwide?
You can source the POWER DRIVE 28LH050 pulley through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide competitive sourcing for this POWER DRIVE component.
How to select the correct bushing for the POWER DRIVE 28LH050 pulley?
To select the correct bushing for the POWER DRIVE 28LH050 pulley, ensure it is a split taper bushing type that matches the pulley's bore range and shaft diameter. Refer to the manufacturer's bushing selection chart for proper fit and torque specifications. Always verify the bushing part number with the pulley's MPN 28LH050.
Digunakan dalam
Aplikasi umum untuk POWER DRIVEPOWER DRIVE Produk
3G Electric memasok POWER DRIVE bushed l section timing belt pulleys. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
