RAPIDAIR Compression Fitting Elbow: 1 1/4 in OD 1 1/4 in OD Fitting Size
The RAPIDAIR Compression Fitting Elbow (MPN M8068) is a brass compression tube fitting for compressed air systems, configured as Compression x Compression with a 1 1/4 in OD fitting size on both ends. 3G Electric…
SKU 3G-OTH-477617
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RAPIDAIR Compression Fitting Elbow (MPN M8068) is a brass compression tube fitting for compressed air systems, configured as Compression x Compression with a 1 1/4 in OD fitting size on both ends. 3G Electric interprets your demand for this OEM-sourced component and delivers it with specialist support across 14 industrial departments, including pneumatics, backed by deep expertise in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RAPIDAIR Compression Fitting Elbow M8068 used for?
The RAPIDAIR Compression Fitting Elbow M8068 is used to connect and redirect compressed air lines in pneumatic systems. Its brass construction and 1 1/4 in OD compression x compression ends provide a reliable, leak-resistant joint in industrial air distribution networks.
What are the specifications of the RAPIDAIR M8068 fitting?
The RAPIDAIR M8068 is a brass compression tube elbow with a 1 1/4 in OD fitting size on both ends, configured as compression x compression. It is designed for compressed air systems and is manufactured by RAPIDAIR under part number M8068.
Where to buy the RAPIDAIR M8068 compression fitting worldwide?
3G Electric supplies the RAPIDAIR M8068 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive this OEM-sourced component for your compressed air system, regardless of your location.
How to install a RAPIDAIR compression fitting elbow?
To install the RAPIDAIR M8068 compression fitting elbow, cut the tube squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand until snug, followed by a wrench turn per manufacturer guidelines.
Digunakan dalam
Aplikasi umum untuk RAPIDAIRRAPIDAIR Produk
3G Electric memasok RAPIDAIR compressed air system brass compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
