RAPIDAIR Compression Tee Fitting: 1 1/4 in OD 1 1/4 in OD 3/4 in Pipe Fitting Size, Reducer
The RAPIDAIR Compression Tee Fitting (MPN M8089) is a brass reducer fitting for compressed air systems, sized 1 1/4 in OD x 1 1/4 in OD x 3/4 in. As a Reducer, Brass type, it connects and reduces tubing in pneumatic…
SKU 3G-OTH-477637
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RAPIDAIR Compression Tee Fitting (MPN M8089) is a brass reducer fitting for compressed air systems, sized 1 1/4 in OD x 1 1/4 in OD x 3/4 in. As a Reducer, Brass type, it connects and reduces tubing in pneumatic lines. 3G Electric interprets your demand for this genuine RAPIDAIR component, sourcing it across our 14 industrial departments with specialist depth in pneumatics and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RAPIDAIR Compression Tee Fitting used for?
The RAPIDAIR Compression Tee Fitting (MPN M8089) is used in compressed air systems to connect and reduce tubing. It joins three pneumatic lines while stepping down from 1 1/4 in OD to 3/4 in pipe size, making it ideal for branch or distribution points in industrial air networks.
What are the specifications of the RAPIDAIR M8089 fitting?
The RAPIDAIR M8089 is a brass compression tee reducer fitting. It has a 1 1/4 in OD x 1 1/4 in OD x 3/4 in pipe fitting size. The type is Reducer, Brass, and the brand is RAPIDAIR. It is designed for compressed air systems and pneumatic lines.
Where to buy the RAPIDAIR Compression Tee Fitting worldwide?
3G Electric supplies the genuine RAPIDAIR Compression Tee Fitting (M8089) worldwide. We interpret your demand, source the component across our 14 industrial departments, and handle full logistics and customs for delivery to your location. Contact us to order.
How to install a RAPIDAIR compression tee fitting?
To install a RAPIDAIR compression tee fitting, ensure tubing ends are clean and cut square. Slide the compression nut and ferrule onto each tube, insert the tube into the fitting body, and tighten the nut with a wrench until snug. Avoid overtightening to prevent brass damage.
Digunakan dalam
Aplikasi umum untuk RAPIDAIRRAPIDAIR Produk
3G Electric memasok RAPIDAIR compressed air system brass compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
