RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 7/16 in Bore Dia, Aluminum
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on aluminum 2024 shaft collar with a 7/16 in bore diameter (MPN SP-7-A). 3G Electric interprets this demand and sources it across 14 industrial…
SKU 3G-OTH-126949
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on aluminum 2024 shaft collar with a 7/16 in bore diameter (MPN SP-7-A). 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in combustion, pumps, and controls as an authorized distributor for brands like Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump, and FBR.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-7-A shaft collar used for?
The RULAND MANUFACTURING SP-7-A is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft. Its 7/16 in bore and 2024 aluminum construction make it suitable for light-duty positioning in machinery, conveyors, and automation systems.
What are the specifications of the RULAND MANUFACTURING SP-7-A shaft collar?
The SP-7-A is a 2-piece, round, clamp-on shaft collar with a 7/16 in bore diameter. It is made from 2024 aluminum and is manufactured by RULAND MANUFACTURING. This inch-series collar is designed for secure, non-marring clamping on shafts.
Where to buy a RULAND MANUFACTURING SP-7-A shaft collar worldwide?
3G Electric supplies the RULAND MANUFACTURING SP-7-A shaft collar worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this genuine RULAND MANUFACTURING part for your application.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the RULAND MANUFACTURING SP-7-A, loosen the clamping screws, slide the collar onto the shaft at the desired position, then evenly tighten the screws to the manufacturer's recommended torque. Avoid over-tightening to prevent shaft damage. Always verify alignment before final tightening.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING aluminum shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
