RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 5/8 in Bore Dia, Aluminum
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on aluminum 2024 shaft collar with a 1 5/8 in bore diameter (MPN SP-26-A). 3G Electric interprets customer demand and delivers this genuine…
SKU 3G-OTH-132308
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on aluminum 2024 shaft collar with a 1 5/8 in bore diameter (MPN SP-26-A). 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing SP-26-A shaft collar used for?
The Ruland Manufacturing SP-26-A is a 2-piece, clamp-on shaft collar used to position and secure components on a shaft without marring the surface. It is commonly applied in power transmission, conveyor systems, and packaging machinery where precise axial positioning is required.
What are the specifications of the Ruland Manufacturing SP-26-A shaft collar?
The Ruland Manufacturing SP-26-A is a 2-piece, round, clamp-on shaft collar with a 1 5/8 in bore diameter. It is made from 2024 aluminum, offering good strength and corrosion resistance. The inch-series design suits standard shafting in industrial equipment.
Where to buy a Ruland Manufacturing SP-26-A shaft collar worldwide?
3G Electric supplies the Ruland Manufacturing SP-26-A shaft collar worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this precision component.
How to install a Ruland Manufacturing 2-piece shaft collar?
To install a Ruland Manufacturing 2-piece shaft collar, place the two halves around the shaft at the desired position, then tighten the clamping screws evenly to the manufacturer’s recommended torque. Avoid over-tightening to prevent shaft damage. Always verify alignment before final tightening.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING aluminum shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
