RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 1/8 in Bore Dia, Aluminum
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on aluminum 2024 shaft collar with a 1 1/8 in bore diameter (MPN SP-18-A). This product is a genuine industrial component for shaft mounting…
SKU 3G-OTH-132358
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on aluminum 2024 shaft collar with a 1 1/8 in bore diameter (MPN SP-18-A). This product is a genuine industrial component for shaft mounting applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-18-A shaft collar used for?
The RULAND MANUFACTURING SP-18-A is a 2-piece, clamp-on shaft collar used to position and secure components on shafts in industrial machinery, conveyors, and automation systems. Its 2024 aluminum construction provides lightweight, corrosion-resistant performance for precision alignment and axial retention in moderate-load applications.
What are the specifications of the RULAND MANUFACTURING SP-18-A shaft collar?
The SP-18-A is an inch, round, 2-piece clamp-on shaft collar with a 1 1/8 in bore diameter. It is made from 2024 aluminum, offering strength and corrosion resistance. The manufacturer part number is SP-18-A, and it is designed for secure, non-marring clamping on shafts without damaging the surface.
Where to buy RULAND MANUFACTURING SP-18-A shaft collars worldwide?
3G Electric supplies the RULAND MANUFACTURING SP-18-A shaft collar worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this part to any country.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the SP-18-A, loosen the clamp screws, slide the collar onto the shaft at the desired position, and tighten the screws evenly to the manufacturer's recommended torque. Ensure the bore aligns with the shaft diameter (1 1/8 in) and avoid over-tightening to prevent damage. Use a torque wrench for precision.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING aluminum shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
