RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 7/16 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on carbon steel collar with a 7/16 in bore diameter (MPN SP-7-F). 3G Electric interprets your demand for genuine industrial components and…
SKU 3G-OTH-160184
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on carbon steel collar with a 7/16 in bore diameter (MPN SP-7-F). 3G Electric interprets your demand for genuine industrial components and delivers this shaft collar across 14 departments, with specialist depth in combustion, pumps, and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing SP-7-F shaft collar used for?
The Ruland Manufacturing SP-7-F is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise axial location is needed without marring the shaft.
What are the specifications of the Ruland Manufacturing SP-7-F shaft collar?
The Ruland Manufacturing SP-7-F is a 2-piece, round, clamp-on shaft collar with a 7/16 in bore diameter. It is made of carbon steel and is designed for inch-size shafts. The manufacturer part number is SP-7-F, and it is classified as a steel shaft collar.
Where to buy a Ruland Manufacturing SP-7-F shaft collar worldwide?
You can source the Ruland Manufacturing SP-7-F shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the component reaches your facility reliably.
How to install a Ruland Manufacturing 2-piece clamp-on shaft collar?
To install the Ruland Manufacturing SP-7-F, place the two halves around the shaft at the desired position, then tighten the clamping screws evenly using a hex key. Avoid over-tightening to prevent shaft damage. Always verify alignment before final torque application.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
