RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric, Round, Clamp-On, 30 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on aluminum shaft collar with a 30 mm bore diameter and 15 mm collar width (MPN MSP-30-A). This product is designed for securing components on…
SKU 3G-OTH-132283
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on aluminum shaft collar with a 30 mm bore diameter and 15 mm collar width (MPN MSP-30-A). This product is designed for securing components on shafts in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING MSP-30-A shaft collar used for?
The RULAND MANUFACTURING MSP-30-A is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a 30 mm shaft. It is commonly applied in industrial machinery, conveyor systems, and automation equipment where precise axial positioning and easy adjustment are required.
What are the specifications of the RULAND MANUFACTURING MSP-30-A shaft collar?
The MSP-30-A is a 2-piece, round, clamp-on shaft collar with a 30 mm bore diameter and a 15 mm collar width. It is made of aluminum and manufactured by RULAND MANUFACTURING. The part number is MSP-30-A, and it is designed for metric shaft applications.
Where to buy RULAND MANUFACTURING MSP-30-A shaft collars worldwide?
You can source the RULAND MANUFACTURING MSP-30-A shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this metric aluminum shaft collar.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the MSP-30-A, loosen the clamp screws, slide the collar onto a clean 30 mm shaft, position it as needed, then tighten the screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent shaft damage. Always verify alignment before finalizing the installation.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING aluminum shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
