RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric, Round, Clamp-On, 45 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar of the metric, round, clamp-on type. It has a 45 mm bore diameter and a 19 mm collar width (MPN MSP-45-F).
SKU 3G-OTH-160213
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar of the metric, round, clamp-on type. It has a 45 mm bore diameter and a 19 mm collar width (MPN MSP-45-F).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING 2-piece shaft collar used for?
A RULAND MANUFACTURING 2-piece shaft collar is used to position, secure, or limit components on a shaft in industrial machinery. It is commonly applied in conveyors, packaging equipment, and automation systems where precise axial location is required. The clamp-on design allows easy installation without damaging the shaft.
What are the specifications of the RULAND MANUFACTURING MSP-45-F shaft collar?
The RULAND MANUFACTURING MSP-45-F is a 2-piece, round, clamp-on steel shaft collar with a 45 mm bore diameter and a 19 mm collar width. It is metric-sized and designed for secure clamping on shafts. The manufacturer part number is MSP-45-F, and it is made by RULAND MANUFACTURING.
Where to buy a RULAND MANUFACTURING MSP-45-F shaft collar worldwide?
You can source the RULAND MANUFACTURING MSP-45-F shaft collar worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we provide reliable sourcing for this and other RULAND components.
How to install a RULAND MANUFACTURING 2-piece shaft collar?
To install a RULAND MANUFACTURING 2-piece shaft collar, first clean the shaft surface. Place the two halves around the shaft, align the bore, then tighten the clamp screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent shaft damage. Always verify axial position before final tightening.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
