RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric, Round, Clamp-On, 80 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on steel shaft collar with an 80 mm bore diameter and 19 mm collar width (MPN MSP-80-F).
SKU 3G-OTH-160420
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on steel shaft collar with an 80 mm bore diameter and 19 mm collar width (MPN MSP-80-F).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-80-F shaft collar used for?
The RULAND MANUFACTURING MSP-80-F is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft in industrial machinery, conveyors, and automation systems. Its 80 mm bore and 19 mm width provide precise axial retention without marring the shaft.
What are the specifications of the RULAND MANUFACTURING MSP-80-F shaft collar?
The MSP-80-F is a metric, round, 2-piece clamp-on steel shaft collar with an 80 mm bore diameter and 19 mm collar width. It is manufactured by RULAND MANUFACTURING under part number MSP-80-F. The clamp-on design allows easy repositioning without damaging the shaft.
Where to buy the RULAND MANUFACTURING MSP-80-F shaft collar worldwide?
3G Electric supplies the RULAND MANUFACTURING MSP-80-F shaft collar worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this part for your application.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the MSP-80-F, loosen the clamp screws, slide the collar onto the shaft at the desired position, then tighten the screws evenly to the manufacturer's recommended torque. Ensure the shaft is clean and free of debris. Always verify alignment before final tightening.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
