RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 1/16 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 1 1/16 in bore diameter, made from 303 stainless steel (MPN SP-17-SS). It is designed for secure shaft…
SKU 3G-OTH-132682
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 1 1/16 in bore diameter, made from 303 stainless steel (MPN SP-17-SS). It is designed for secure shaft positioning and clamping in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-17-SS shaft collar used for?
The RULAND MANUFACTURING SP-17-SS is a 2-piece, clamp-on shaft collar used to position, secure, or limit axial movement on a shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise component alignment and retention are required.
What are the specifications of the RULAND MANUFACTURING SP-17-SS shaft collar?
The SP-17-SS is a 2-piece, round, clamp-on shaft collar with a 1 1/16 inch bore diameter. It is made from 303 stainless steel for corrosion resistance. The manufacturer part number is SP-17-SS, and it is designed for inch-size shafts in industrial applications.
Where to buy RULAND MANUFACTURING SP-17-SS shaft collars worldwide?
You can source the RULAND MANUFACTURING SP-17-SS shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this item.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the RULAND MANUFACTURING SP-17-SS, place the two halves around the shaft at the desired position. Tighten the clamp screws evenly using a hex key until the collar is secure. Avoid over-tightening to prevent shaft damage. Ensure the shaft surface is clean before installation.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
