RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 5/8 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on steel shaft collar with a 1 5/8 in bore diameter, made from carbon steel (MPN SP-26-F). 3G Electric sources this genuine industrial component…
SKU 3G-OTH-160425
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on steel shaft collar with a 1 5/8 in bore diameter, made from carbon steel (MPN SP-26-F). 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in combustion, pumps, and controls ensuring accurate fulfillment.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-26-F shaft collar used for?
The RULAND MANUFACTURING SP-26-F is a 2-piece, clamp-on shaft collar used to position and secure components on a shaft without marring the shaft surface. It is commonly applied in power transmission, conveyor systems, and industrial machinery where precise axial location is required.
What are the specifications of the RULAND MANUFACTURING SP-26-F shaft collar?
The SP-26-F is a 2-piece, round, clamp-on shaft collar made from carbon steel. It has a bore diameter of 1 5/8 in and uses inch dimensions. The manufacturer part number is SP-26-F, and it is produced by RULAND MANUFACTURING.
Where to buy a RULAND MANUFACTURING SP-26-F shaft collar worldwide?
3G Electric supplies the RULAND MANUFACTURING SP-26-F shaft collar worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the RULAND MANUFACTURING SP-26-F, place the two halves around the shaft at the desired position, then tighten the clamping screws evenly to secure the collar. Ensure the bore is clean and the shaft is free of debris. Use a torque wrench to avoid over-tightening.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
