RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 15 mm Collar Wd (MPN MSP-13E-F). 3G Electric interprets customer demand and delivers this…
SKU 3G-OTH-160246
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 15 mm Collar Wd (MPN MSP-13E-F). 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-13E-F shaft collar used for?
The RULAND MANUFACTURING MSP-13E-F is a 2-piece, clamp-on steel shaft collar used to position and secure components on shafts in industrial machinery, conveyors, and automation equipment. Its round, metric design with an inch bore provides precise axial location and torque transmission without marring the shaft.
What are the specifications of the RULAND MANUFACTURING MSP-13E-F shaft collar?
The MSP-13E-F is a steel shaft collar with a 2-piece, round, clamp-on design. It has a metric with inch bore configuration and a collar width of 15 mm. The manufacturer part number is MSP-13E-F, and it is produced by RULAND MANUFACTURING.
Where to buy the RULAND MANUFACTURING MSP-13E-F shaft collar worldwide?
You can source the RULAND MANUFACTURING MSP-13E-F shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the part reaches your facility reliably.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the MSP-13E-F, place the two collar halves around the shaft at the desired position, align the clamping screws, and tighten them evenly with a hex key to the manufacturer's recommended torque. Ensure the shaft is clean and free of debris before installation for secure clamping.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
