RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece stainless steel shaft collar, model MSP-15E-ST, featuring a metric with inch bore, round, clamp-on design and a 15 mm collar width. 3G Electric interprets customer…
SKU 3G-OTH-132574
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece stainless steel shaft collar, model MSP-15E-ST, featuring a metric with inch bore, round, clamp-on design and a 15 mm collar width. 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments, with specialist depth in combustion, pumps, and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING MSP-15E-ST shaft collar used for?
The RULAND MANUFACTURING MSP-15E-ST is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise axial location and reliable clamping are required.
What are the specifications of the RULAND MANUFACTURING MSP-15E-ST shaft collar?
The MSP-15E-ST is a stainless steel, 2-piece, round clamp-on shaft collar with a metric bore and inch bore compatibility. It has a collar width of 15 mm. The manufacturer part number is MSP-15E-ST, and it is produced by RULAND MANUFACTURING.
Where to buy RULAND MANUFACTURING MSP-15E-ST shaft collars worldwide?
You can source the RULAND MANUFACTURING MSP-15E-ST shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the product reaches your facility reliably.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the MSP-15E-ST, place the two halves around the shaft, align the clamping screws, and tighten them evenly with a hex key. Ensure the bore is clean and the shaft is free of debris. Avoid over-tightening to prevent shaft damage. Always follow RULAND MANUFACTURING's generic installation guidelines.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
