RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece aluminum shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 15 mm collar width (MPN MSP-19E-AN). 3G Electric interprets your demand and sources this…
SKU 3G-OTH-132367
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece aluminum shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 15 mm collar width (MPN MSP-19E-AN). 3G Electric interprets your demand and sources this genuine industrial component across 14 departments — with specialist depth in combustion, pumps and controls — ensuring you get the right answer, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing 2-piece shaft collar used for?
A Ruland Manufacturing 2-piece shaft collar is used to locate, space, or position components on a shaft without damaging the shaft surface. It is commonly applied in industrial machinery, conveyors, and automation equipment where precise axial positioning and easy installation or removal are required.
What are the specifications of the Ruland MSP-19E-AN shaft collar?
The Ruland MSP-19E-AN is a 2-piece, round, clamp-on shaft collar with a metric design and an inch bore. It has a collar width of 15 mm and is made of aluminum. The manufacturer part number is MSP-19E-AN, and it is produced by Ruland Manufacturing.
Where to buy Ruland Manufacturing shaft collars worldwide?
You can source Ruland Manufacturing shaft collars worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the MSP-19E-AN or other Ruland components.
How to install a Ruland 2-piece clamp-on shaft collar?
To install a Ruland 2-piece clamp-on shaft collar, separate the two halves, place them around the shaft at the desired position, then tighten the clamping screws evenly to secure the collar. Ensure the bore is clean and the shaft is free of debris. Use a torque wrench to avoid over-tightening the aluminum collar.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING aluminum shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
