RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric, Round, Clamp-On, 8 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on steel shaft collar with an 8 mm bore diameter and 9 mm collar width (MPN MSP-8-FZ).
SKU 3G-OTH-160277
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on steel shaft collar with an 8 mm bore diameter and 9 mm collar width (MPN MSP-8-FZ).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-8-FZ shaft collar used for?
The RULAND MANUFACTURING MSP-8-FZ is a 2-piece, clamp-on shaft collar used to position, secure, or limit axial movement on an 8 mm shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise component alignment and retention are required.
What are the specifications of the RULAND MANUFACTURING MSP-8-FZ shaft collar?
The MSP-8-FZ is a metric, round, 2-piece clamp-on shaft collar with an 8 mm bore diameter and a 9 mm collar width. It is made of steel and manufactured by RULAND MANUFACTURING. The part number is MSP-8-FZ, and it is designed for secure clamping without marring the shaft.
Where to buy the RULAND MANUFACTURING MSP-8-FZ shaft collar worldwide?
You can source the RULAND MANUFACTURING MSP-8-FZ shaft collar worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the RULAND MANUFACTURING MSP-8-FZ, place the two halves around the 8 mm shaft, align the clamping screws, and tighten them evenly with a hex key. Ensure the collar is positioned correctly before final tightening. Avoid over-torquing to prevent damage to the collar or shaft.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
