RULAND MANUFACTURING Slit Coupling: 5 mm Bore Dia 1, 5 mm Bore Dia 2
The RULAND MANUFACTURING MRLC25-5-5-A is a long clamp-on slit coupling with 5 mm bore diameters on both ends and a 25 mm outside diameter. This coupling is designed for motion control applications requiring zero…
SKU 3G-OTH-151453
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRLC25-5-5-A is a long clamp-on slit coupling with 5 mm bore diameters on both ends and a 25 mm outside diameter. This coupling is designed for motion control applications requiring zero backlash and high torsional stiffness.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING Slit Coupling used for?
A RULAND MANUFACTURING Slit Coupling, such as the MRLC25-5-5-A, is used to connect two shafts in motion-control systems, compensating for misalignment while transmitting torque. It is common in precision automation, robotics, and packaging equipment where zero-backlash and low-hysteresis performance is required.
What are the specifications of the RULAND MANUFACTURING MRLC25-5-5-A?
The RULAND MANUFACTURING MRLC25-5-5-A is a long clamp-on slit coupling with 5 mm bore diameter on both ends and a 25 mm coupling outside diameter. It is designed for precise shaft alignment in industrial applications. The manufacturer part number is MRLC25-5-5-A.
Where to buy RULAND MANUFACTURING couplings in worldwide?
You can source RULAND MANUFACTURING couplings, including the MRLC25-5-5-A, through 3G Electric. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead times on this and other motion-control components.
How to install a RULAND MANUFACTURING slit coupling?
To install a RULAND MANUFACTURING slit coupling, ensure both shaft ends are clean and aligned. Loosen the clamp screws, slide the coupling onto the shafts, and tighten the screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent damage to the coupling or shafts.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING long clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
