RULAND MANUFACTURING Slit Coupling: 10 mm Bore Dia 1, 5 mm Bore Dia 2
The RULAND MANUFACTURING MRSC20-10-5-A is a short clamp-on slit coupling with a 10 mm bore diameter 1 and a 5 mm bore diameter 2, featuring a 20 mm coupling outside diameter. This product is a short clamp-on slit…
SKU 3G-OTH-142034
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRSC20-10-5-A is a short clamp-on slit coupling with a 10 mm bore diameter 1 and a 5 mm bore diameter 2, featuring a 20 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING slit coupling used for?
A RULAND MANUFACTURING slit coupling, such as the MRSC20-10-5-A, is used to connect two shafts in motion-control systems while compensating for minor misalignment. It is common in servo motors, encoders, and precision positioning equipment where zero backlash and torsional rigidity are required.
What are the specifications of the RULAND MANUFACTURING MRSC20-10-5-A slit coupling?
The MRSC20-10-5-A is a short clamp-on slit coupling with a 10 mm bore diameter 1, a 5 mm bore diameter 2, and a 20 mm coupling outside diameter. It is manufactured by RULAND MANUFACTURING and is designed for applications requiring accurate torque transmission and misalignment accommodation.
Where to buy RULAND MANUFACTURING slit couplings worldwide?
You can source RULAND MANUFACTURING slit couplings, including the MRSC20-10-5-A, through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to worldwide destinations, ensuring reliable procurement for your motion-control needs.
How to install a RULAND MANUFACTURING clamp-on slit coupling?
To install a RULAND MANUFACTURING clamp-on slit coupling, first ensure shaft ends are clean and aligned. Loosen the clamp screws, slide the coupling onto both shafts, then tighten the screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent damage to the coupling or shafts.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
