RULAND MANUFACTURING Slit Coupling: 8 mm Bore Dia 1, 4 mm Bore Dia 2
The RULAND MANUFACTURING MRSC20-8-4-A is a short clamp-on slit coupling with an 8 mm bore diameter 1 and a 4 mm bore diameter 2, featuring a 20 mm coupling outside diameter. This product is a Short Clamp-On Slit…
SKU 3G-OTH-141995
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRSC20-8-4-A is a short clamp-on slit coupling with an 8 mm bore diameter 1 and a 4 mm bore diameter 2, featuring a 20 mm coupling outside diameter. This product is a Short Clamp-On Slit Coupling from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING Slit Coupling used for?
A RULAND MANUFACTURING Slit Coupling is used to connect two rotating shafts in motion-control applications, compensating for minor misalignment while transmitting torque. It is commonly found in precision equipment such as encoders, stepper motors, and linear actuators where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND MANUFACTURING MRSC20-8-4-A?
The RULAND MANUFACTURING MRSC20-8-4-A is a short clamp-on slit coupling with an 8 mm bore diameter 1 and a 4 mm bore diameter 2. Its coupling outside diameter is 20 mm. This model is designed for applications needing a compact, zero-backlash connection between shafts of different sizes.
Where to buy RULAND MANUFACTURING couplings in worldwide?
You can source RULAND MANUFACTURING couplings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the MRSC20-8-4-A or other RULAND MANUFACTURING slit couplings.
How to install a RULAND MANUFACTURING slit coupling?
To install a RULAND MANUFACTURING slit coupling, first ensure both shaft ends are clean and free of burrs. Slide the coupling onto the shafts, aligning the bores with the shaft diameters. Tighten the clamp screws evenly to the manufacturer's recommended torque using a hex key. Avoid over-tightening to prevent damage to the coupling or shafts.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
