RULAND MANUFACTURING Slit Coupling: 8 mm Bore Dia 1, 5 mm Bore Dia 2
The RULAND MANUFACTURING MRSC20-8-5-A is a short clamp-on slit coupling with an 8 mm bore diameter 1 and a 5 mm bore diameter 2, featuring a 20 mm coupling outside diameter. This product is a short clamp-on slit…
SKU 3G-OTH-142067
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRSC20-8-5-A is a short clamp-on slit coupling with an 8 mm bore diameter 1 and a 5 mm bore diameter 2, featuring a 20 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing slit coupling used for?
A Ruland Manufacturing slit coupling connects two shafts in motion-control systems, compensating for minor misalignment while transmitting torque. It is commonly used in encoders, stepper motors, and precision positioning equipment where zero backlash and high torsional stiffness are required.
What are the specifications of the Ruland MRSC20-8-5-A slit coupling?
The Ruland MRSC20-8-5-A is a short clamp-on slit coupling with an 8 mm bore diameter 1, a 5 mm bore diameter 2, and a 20 mm coupling outside diameter. It is manufactured by Ruland Manufacturing and is designed for precise, low-backlash shaft connections.
Where to buy a Ruland MRSC20-8-5-A slit coupling worldwide?
You can source the Ruland MRSC20-8-5-A slit coupling through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the coupling reaches your facility reliably.
How to install a Ruland slit coupling correctly?
To install a Ruland slit coupling, clean both shaft ends and the coupling bores. Slide the coupling onto the shafts, align the components, then tighten the clamp screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent damage to the coupling or shafts.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
