RULAND MANUFACTURING Slit Coupling: 6 mm Bore Dia 1, 3/16 in Bore Dia 2
The RULAND MANUFACTURING RLC10-6MM-3/16"-A is a long clamp-on slit coupling with a 6 mm bore diameter 1, a 3/16 in bore diameter 2, and a 5/8 in coupling outside diameter. This product is a slit coupling type from…
SKU 3G-OTH-151447
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING RLC10-6MM-3/16"-A is a long clamp-on slit coupling with a 6 mm bore diameter 1, a 3/16 in bore diameter 2, and a 5/8 in coupling outside diameter. This product is a slit coupling type from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING slit coupling used for?
A RULAND MANUFACTURING slit coupling connects two shafts in motion-control systems, compensating for misalignment while transmitting torque. It is commonly used in encoders, stepper motors, and linear actuators where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND RLC10-6MM-3/16"-A slit coupling?
The RULAND RLC10-6MM-3/16"-A is a long clamp-on slit coupling with a 6 mm bore diameter 1 and a 3/16 in bore diameter 2. Its outside diameter is 5/8 in. The coupling is made by RULAND MANUFACTURING and is designed for precision motion control.
Where to buy RULAND MANUFACTURING slit couplings worldwide?
You can source RULAND MANUFACTURING slit couplings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a RULAND MANUFACTURING clamp-on slit coupling?
To install a RULAND clamp-on slit coupling, clean both shaft ends and slide the coupling onto them. Tighten the clamp screws evenly to the manufacturer's recommended torque using a torque wrench. Ensure shafts are aligned within the coupling's rated misalignment limits to avoid premature wear.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING long clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
