TELEMECANIQUE SENSORS Water Pump Switch: Std, 5 psi – 65 psi, 1/4" FNPS
The TELEMECANIQUE SENSORS Water Pump Switch: Std (SKU 2PXY7, MPN 9013FSG2J24P) is a general-purpose water pump switch with a diaphragm actuator and a 1/4" FNPS connection. It operates in a standard configuration with…
SKU 3G-OTH-198728
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS Water Pump Switch: Std (SKU 2PXY7, MPN 9013FSG2J24P) is a general-purpose water pump switch with a diaphragm actuator and a 1/4" FNPS connection. It operates in a standard configuration with a pressure range of 5 psi to 65 psi and an ON/OFF setpoint of 40 psi/60 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS 9013FSG2J24P water pump switch used for?
This general-purpose water pump switch controls pump operation based on system pressure. It is used in residential and light commercial water systems to start the pump at 40 psi and stop it at 60 psi, with a diaphragm actuator and 1/4" FNPS connection.
What are the specifications of the TELEMECANIQUE SENSORS 9013FSG2J24P?
The switch has a pressure range of 5 psi to 65 psi, with ON/OFF setpoints of 40 psi/60 psi. It features a diaphragm actuator and a 1/4" FNPS connection. The manufacturer part number is 9013FSG2J24P, and it is a standard configuration model.
Where to buy the TELEMECANIQUE SENSORS 9013FSG2J24P worldwide?
3G Electric supplies the TELEMECANIQUE SENSORS 9013FSG2J24P water pump switch to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this diaphragm-actuated switch.
How to install a TELEMECANIQUE SENSORS water pump switch?
Installation requires mounting the switch on a 1/4" FNPS port, wiring according to the pump motor voltage, and setting the cut-in/cut-out pressures. Always disconnect power before installation and follow local electrical codes. Adjust the differential nut to fine-tune the 40 psi/60 psi setpoints.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS general purpose water pump switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
