TELEMECANIQUE SENSORS Water Pump Switch: Std, 5 psi – 80 psi, 1/4" FNPS
The TELEMECANIQUE SENSORS Water Pump Switch: Std (SKU 2PXZ3, MPN 9013FSG52J33) is a general-purpose water pump switch with a diaphragm actuator. It features a 1/4" FNPS connection, a pressure range of 5 psi to 80…
SKU 3G-OTH-198730
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS Water Pump Switch: Std (SKU 2PXZ3, MPN 9013FSG52J33) is a general-purpose water pump switch with a diaphragm actuator. It features a 1/4" FNPS connection, a pressure range of 5 psi to 80 psi, and ON/OFF set points of 50 psi and 70 psi respectively. This standard model includes no additional options.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS 9013FSG52J33 water pump switch used for?
This general-purpose water pump switch controls pump operation based on system pressure. It is used in residential and light commercial water systems to start a pump at 50 psi and stop it at 70 psi, protecting against dry running and maintaining consistent pressure.
What are the specifications of the TELEMECANIQUE SENSORS 9013FSG52J33?
The TELEMECANIQUE SENSORS 9013FSG52J33 is a standard water pump switch with a diaphragm actuator. It has a 1/4" FNPS connection, a pressure range of 5 psi to 80 psi, and ON/OFF set points of 50 psi and 70 psi. No additional options are included.
Where to buy the TELEMECANIQUE SENSORS 9013FSG52J33 worldwide?
3G Electric supplies the TELEMECANIQUE SENSORS 9013FSG52J33 water pump switch to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this standard diaphragm switch.
How to install a TELEMECANIQUE SENSORS water pump switch?
Install the switch on the pump discharge line using the 1/4" FNPS connection. Ensure the diaphragm is not damaged and the pressure range matches your system. Wire according to the manufacturer's diagram, and verify the ON/OFF set points (50/70 psi) before pressurizing.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS general purpose water pump switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
