TELEMECANIQUE SENSORS Water Pump Switch: Std, 5 psi – 80 psi, 1/4" FNPS
The TELEMECANIQUE SENSORS Water Pump Switch: Std (MPN 9013FYG2J21M4) is a high-performance water pump switch with a diaphragm design. It features a 5 psi – 80 psi pressure range, 1/4" FNPS connection, and 30 psi / 50…
SKU 3G-OTH-172028
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS Water Pump Switch: Std (MPN 9013FYG2J21M4) is a high-performance water pump switch with a diaphragm design. It features a 5 psi – 80 psi pressure range, 1/4" FNPS connection, and 30 psi / 50 psi ON/OFF differential. The switch offers Auto/Start/Off operation and is classified as Standard type.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS 9013FYG2J21M4 water pump switch used for?
This TELEMECANIQUE SENSORS water pump switch controls pump operation based on water pressure. It is used in residential, commercial, and light industrial water systems to automatically start and stop pumps within a 5 psi to 80 psi range, with a 30 psi ON / 50 psi OFF differential.
What are the specifications of the TELEMECANIQUE SENSORS 9013FYG2J21M4?
The TELEMECANIQUE SENSORS 9013FYG2J21M4 is a standard diaphragm-type water pump switch with a 1/4" FNPS connection. It operates across 5 psi – 80 psi with a 30 psi ON / 50 psi OFF differential. The switch offers Auto/Start/Off control modes.
Where to buy the TELEMECANIQUE SENSORS 9013FYG2J21M4 worldwide?
3G Electric supplies the TELEMECANIQUE SENSORS 9013FYG2J21M4 water pump switch to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time.
How to install a TELEMECANIQUE SENSORS water pump switch?
Installation of a TELEMECANIQUE SENSORS water pump switch requires connecting the 1/4" FNPS port to the pump system, wiring the Auto/Start/Off terminals per the pump motor voltage, and setting the cut-in and cut-out pressures within the 5 psi – 80 psi range. Always follow local electrical codes and the manufacturer's manual.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS high-performance water pump switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
