TIMKEN Pillow Block Bearing: 1 11/16 in Bore, Cast Iron, Eccentric Collar
The TIMKEN RAK 1-11/16 is an inch-system low-base pillow block ball bearing with a 1 11/16 in bore, designed for industrial equipment. It features a cast iron housing with an eccentric collar and a 2 1/16 in shaft…
SKU 3G-OTH-106728
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN RAK 1-11/16 is an inch-system low-base pillow block ball bearing with a 1 11/16 in bore, designed for industrial equipment. It features a cast iron housing with an eccentric collar and a 2 1/16 in shaft height, secured by a 1/2 in mounting bolt. This unit provides a compact, low-profile mounting solution for rotating shaft applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN RAK 1-11/16 pillow block bearing used for?
The TIMKEN RAK 1-11/16 is a low-base pillow block ball bearing used to support rotating shafts in industrial equipment. Its compact cast iron housing with eccentric collar provides secure mounting in conveyors, fans, and material handling systems where space is limited.
What are the specifications of the TIMKEN RAK 1-11/16?
The TIMKEN RAK 1-11/16 has a 1 11/16 in bore, 2 1/16 in shaft height, and uses a 1/2 in mounting bolt. It features a cast iron housing with eccentric collar, inch-system measurement, and is designed for low-base pillow block applications.
Where to buy the TIMKEN RAK 1-11/16 worldwide?
3G Electric supplies the TIMKEN RAK 1-11/16 pillow block bearing worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this inch-system bearing to your facility, regardless of location.
How to install the TIMKEN RAK 1-11/16 pillow block bearing?
Install the TIMKEN RAK 1-11/16 by securing the cast iron base to a flat surface using 1/2 in bolts. Align the shaft through the bore, then tighten the eccentric collar in the shaft's rotation direction to lock the bearing. Verify shaft height of 2 1/16 in for proper fit.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
