TIMKEN Pillow Block Bearing: 3/4 in Bore, Cast Iron, Set Screws, 1 1/4 in Shaft Ht
The TIMKEN SAK 3/4 is an inch-system low-base pillow block ball bearing with a 3/4 in bore, designed for industrial equipment. It features a cast iron housing with set screw locking, a 1 1/4 in shaft height, and a 5…
SKU 3G-OTH-103531
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAK 3/4 is an inch-system low-base pillow block ball bearing with a 3/4 in bore, designed for industrial equipment. It features a cast iron housing with set screw locking, a 1 1/4 in shaft height, and a 5 in overall length. The bearing mounts using 3/8 in bolts.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAK 3/4 pillow block bearing used for?
The TIMKEN SAK 3/4 is a low-base pillow block ball bearing used in industrial equipment to support rotating shafts. Its cast iron housing with set screw locking suits conveyors, fans, and material handling systems where a compact, inch-dimensioned bearing is needed.
What are the specifications of the TIMKEN SAK 3/4 pillow block bearing?
The TIMKEN SAK 3/4 has a 3/4 in bore, cast iron housing with set screws, 1 1/4 in shaft height, 5 in overall length, and mounts with 3/8 in bolts. It is an inch-system low-base pillow block ball bearing, MPN SAK 3/4.
Where to buy the TIMKEN SAK 3/4 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAK 3/4 pillow block bearing worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this inch-system low-base bearing.
How to install the TIMKEN SAK 3/4 pillow block bearing?
Mount the TIMKEN SAK 3/4 on a flat surface using 3/8 in bolts through the base holes. Align the shaft with the 3/4 in bore, then tighten the set screws evenly against the shaft. Ensure the housing is level to avoid misalignment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
