TIMKEN Pillow Block Bearing: 1 3/16 in Bore, Cast Iron, Set Screws
The TIMKEN SAK 1-3/16 is a low-base pillow block ball bearing with a 1 3/16-inch bore, constructed from cast iron and featuring set-screw locking. This inch-system unit has a 1 9/16-inch shaft height and accepts a…
SKU 3G-OTH-101960
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAK 1-3/16 is a low-base pillow block ball bearing with a 1 3/16-inch bore, constructed from cast iron and featuring set-screw locking. This inch-system unit has a 1 9/16-inch shaft height and accepts a 1/2-inch mounting bolt. It is identified by manufacturer part number SAK 1-3/16.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAK 1-3/16 pillow block bearing used for?
The TIMKEN SAK 1-3/16 is a low-base pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast-iron housing and set-screw locking provide reliable shaft retention in moderate-load, inch-system applications.
What are the specifications of the TIMKEN SAK 1-3/16 pillow block bearing?
The TIMKEN SAK 1-3/16 has a 1 3/16-inch bore, a 1 9/16-inch shaft height, and a cast-iron housing with set-screw locking. It uses a 1/2-inch mounting bolt and follows the inch system of measurement. The manufacturer part number is SAK 1-3/16.
Where to buy the TIMKEN SAK 1-3/16 pillow block bearing worldwide?
You can source the TIMKEN SAK 1-3/16 pillow block bearing from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the bearing reaches your facility reliably.
How to install the TIMKEN SAK 1-3/16 pillow block bearing?
To install the TIMKEN SAK 1-3/16, first align the bearing on a flat mounting surface and secure it using 1/2-inch bolts. Tighten the set screws evenly against the shaft to prevent slippage. Ensure the shaft rotates freely before full operation. Follow standard pillow block installation practices.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
