TIMKEN Pillow Block Bearing: 1 1/4 in Bore, Cast Iron, Set Screws
The TIMKEN SAK 1-1/4 is an inch-system low-base pillow block ball bearing with a 1 1/4 in bore, constructed from cast iron and featuring set screw locking. It has a 1 13/16 in shaft height and accommodates a 1/2 in…
SKU 3G-OTH-103118
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAK 1-1/4 is an inch-system low-base pillow block ball bearing with a 1 1/4 in bore, constructed from cast iron and featuring set screw locking. It has a 1 13/16 in shaft height and accommodates a 1/2 in mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAK 1-1/4 pillow block bearing used for?
The TIMKEN SAK 1-1/4 is a low-base pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load, inch-system applications.
What are the specifications of the TIMKEN SAK 1-1/4?
The TIMKEN SAK 1-1/4 has a 1 1/4 in bore, cast iron housing with set screw locking, a 1 13/16 in shaft height, and accommodates a 1/2 in mounting bolt size. It is an inch-system low-base pillow block ball bearing, MPN SAK 1-1/4.
Where to buy the TIMKEN SAK 1-1/4 worldwide?
3G Electric supplies the TIMKEN SAK 1-1/4 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the TIMKEN SAK 1-1/4 pillow block bearing?
Mount the bearing on a clean, flat surface using 1/2 in bolts through the base slots. Align the shaft with the bore, tighten the set screws evenly against the shaft, and verify free rotation. Follow TIMKEN's generic installation guidelines for proper preload and lubrication.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
